Hyne Timber Beam 17 is suitable for indoor and outdoor, above ground applications in Australia.
The renowned natural strength of timber is enhanced with our glue laminating process, ensuring Beam 17 is comparatively lightweight and ideal for long span / high load applications. Beam 17 is ideal for lintels over large window and door openings, garage openings or roof beams where spans over large spaces are dictated by design.
Readily available in a range of the most commonly specified sizes and lengths, Beam 17 is versatile and more practical to install than steel.
Sustainably sourced pine
Fungal resistant product*
Termite resistant product**
Product of Australia
Beam 17 is available in two finish grades as per AS 1328.1 – 1998:
Appearance Grade AAppearance Grade B
APPEARANCE GRADE A
Intended for use in applications where appearance is important and clear or painted finishes are used. All surface voids are therefore filled or repaired. Unless otherwise specified, the surfaces are sanded to a minimum 60 grit finish.
APPEARANCE GRADE B
Intended for use in painted applications or applications where appearance is not important. The surface is clean and planed but may exhibit minor blemishes.
65MM THICKNESS
130 x 65 165 x 65 195 x 65 230 x 65 260 x 65 295 x 65 330 x 65 360 x 65 395 x 65 425 x 65 460 x 65 495 x 65
85MM THICKNESS
130 x 85 165 x 85 195 x 85 230 x 85 260 x 85 295 x 85 330 x 85 360 x 85 395 x 85 425 x 85 460 x 85 495 x 85 525 x 85 560 x 85 590 x 85
130MM THICKNESS
130 x 130 165 x 130 195 x 130 230 x 130 260 x 130 295 x 130 330 x 130 360 x 130 395 x 130 425 x 130 460 x 130 495 x 130 525 x 130 560 x 130 590 x 130
2.4m to 16.8m (in 0.3m increments)
Straight (made to order)
Cambered to 600m radius
Curved - down to 1.5m radius (made to order)
Internal and external*
Above ground applications only
Lintels
Bearers
Beams
Rafters
Columns / Blades
Portal Frames
Durability Class 4 (Above Ground) Timber Species
*Available H3 treated for external, above ground applications
**Available H2 treated for internal, above ground applications
Available untreated for internal, above ground applications
MANUFACTURING STANDARDS
AS/NZS 1328.1 – 1998 Glued laminated structural timber Part 1: Performance requirements and minimum production requirements.
AS 5068 – 2006 Timber - Finger joints in structural products - Production requirements
DESIGN STANDARDS
AS1720.1-2010 – Timber structures Part 1: Design methods.
S MARK CERTIFIED
Pinus Elliottii
Pinus Caribaea
Hybrids of Pinus Elliottii and Pinus Caribaea
Pinus Radiata