A Technical Data Sheet (TDS) is a document that summarises the performance of a product, material or system and the associated handling, application, installation and maintenance advice in detail. The Hyne Timber TDS documents are commonly referenced in product documentation, and are detailed below.

 

Download Technical Data Sheet #5 - Glulam Handling and Protection here:

Download Technical Data Sheet #6 - Using Timber Outdoors Above Ground here:

Download Technical Data Sheet #8 - Coating Timber for Outdoors Above Ground here:

Download Technical Data Sheet #9 - Timber Design for Durability here:

Timber Queensland also provides technical data sheets. Download them from the list below:

#1 - Timber Panelling
#2 - Finishes for Exterior Timber
#3 - Treated Pine Cladding
#4 - Residential Timber Decks
#5 - Cypress Hardwood Cladding
#6 - Treated Pine Outdoors
#7 - Timber Deck
#8 - Timber Garden Walls
#9 - Timber Retaining Walls
#10 - Seasoned Softwood Framing
#11 - Tongue Groove Timber Flooring
#12 - Termite Management
#13 - Residential Timber Decks Close Ground
#14 - Sub-floor Ventilation
#15 - Specifying Timber
#16a - Species, Properties and Uses
#16b - Species Tables
#17 - Timber Floors Pre Installation Assessment
#18 - Timber Floors Recommended Installation
#19 - Pergolas and Carports
#20 - Residential Timber Fences
#21 - Sanding Finishing
#22 - Light Organic Solvent
#23 - Timber Handrails Balustrades
#24 - Recommendations for Use of H3
#25 - Outdoor Timber Performance
#26 - Truss Installation
#27 - Measuring the Moisture
#28 - Moisture in Timber
#29 - Moisture Effects on In Service Performance
#30 - Fire Hazard Properties
#31 - Acceptable Appearances
#32 - Wind Tie Down
#33 - Separating Walls
#34 - Timber Treatment Brands
#35 - Corrosion Resistance of Metal Connectors