Structural solution

Indoor, above ground only

Safe to handle and work with

Product of Australia

Beam 18 is available in two finish grades as per AS 1328.1 – 1998:

Appearance Grade A
Appearance Grade B

APPERANCE GRADE A

Intended for use in applications where appearance is important and clear or painted finishes are used. All surface voids are therefore filled or repaired. Unless otherwise specified, the surfaces are sanded to a minimum 60 grit finish.

APPEARANCE GRADE B

Intended for use in painted applications or applications where appearance is not important. The surface is clean and planed but may exhibit minor blemishes.

65MM THICKNESS

120 x 65
155 x 65
185 x 65
215 x 65
240 x 65
270 x 65
300 x 65
330 x 65
360 x 65
390 x 65
420 x 65

85MM THICKNESS

120 x 85
155 x 85
185 x 85
215 x 85
240 x 85
270 x 85
300 x 85
330 x 85
360 x 85
390 x 85
420 x 85
450 x 85
480 x 85
510 x 85
540 x 85
570 x 85
600 x 85

130MM THICKNESS

120 x 130
155 x 130
185 x 130
215 x 130
240 x 130
270 x 130
300 x 130
330 x 130
360 x 130
390 x 130
420 x 130
450 x 130
480 x 130
510 x 130
540 x 130
570 x 130
600 x 130

Straight

Cambered to 600m radius

Curved - down to 5m radius

Internal only

Above ground applications only

Lintels

Bearers

Beams

Rafters

Columns / Blades

Portal Frames

Durability Class 4 (Above Ground) Timber Species

Available untreated for internal, above ground applications only

MANUFACTURING STANDARDS

AS/NZS 1328.1 – 1998 Glued laminated structural timber Part 1: Performance requirements and minimum production requirements.

AS 5068 – 2006 Timber - Finger joints in structural products - Production requirements

DESIGN STANDARDS

AS1720.1-2010 – Timber structures Part 1: Design methods.

S MARK CERTIFIED

Victorian Ash